###
气象:2010,36(10):128-133
本文二维码信息
码上扫一扫!
CINRAD/SB伺服系统线路设计特点和维修方法
(1.河南省大气探测技术保障中心, 郑州 450003;2.中国气象局气象探测中心, 北京 100081;3.河南省气象局, 郑州 450003;4.河南省郑州市气象局, 郑州 450005)
CINRAD/SB Servo System Designing Characteristics and Its Maintaining Methods
(1.Henan Provincial Atmospheric Observation Technical Support Center, Zhengzhou 450003;2.Meteorological Observation Center, China Meteorological Administration, Beijing 100081;3.Henan Provincial Meteorological Bureau, Zhengzhou 450003;4.Zhengzhou Meteorological Office of Henan Province, Zhengzhou 450005)
摘要
图/表
参考文献
相似文献
本文已被:浏览 1976次   下载 2307
投稿时间:2009-09-21    修订日期:2010-04-18
中文摘要: 总结了CINRAD/SB型新一代天气雷达交流变频调速数字伺服系统线路技术特点和与CINRAD/SA线路设计上的差别。根据数字伺服系统信号流程、电源控制保护原理,从状态监测信息、FC文件信息、报警信息、关键点参数测量和关键信号的传输路径入手,详细介绍了数字伺服系统故障诊断方法和技巧,并列举了两个不同类型的典型故障个例的理论分析和处理步骤。提出了伺服系统维修方面的一些建议,为新一代天气雷达技术支持和保障提供借鉴。
Abstract:The differences of circuit design between CINRAD/SB alternating frequency conversion numerical servo system and those of CINRAD/SA are summarized herein. Based on the signal procedure of servo system and principle of power protection, the fault diagnosis methods of numerical servo system are detailedly described through analyzing the condition monitoring information, file FC information, alarm, key point parameter measurements and key signal transmission paths. Meanwhile, two different typical fault examples are analyzed theoretically. And then some suggestions are given on maintaining the servo system, which are providing useful references to CINRAD techniques.
文章编号:     中图分类号:    文献标志码:
基金项目:
引用文本:
潘新民,柴秀梅,王全周,徐俊领,崔炳俭,2010.CINRAD/SB伺服系统线路设计特点和维修方法[J].气象,36(10):128-133.
PAN Xinmin,CHAI Xiumei,WANG Quanzhou,XU Junling,CUI bingjian,2010.CINRAD/SB Servo System Designing Characteristics and Its Maintaining Methods[J].Meteor Mon,36(10):128-133.